HY11P
HY11P Series: 8-bit Mixed Signal Microcontrollers with Embedded High Resolution ΣΔ ADC
Product Features
- Operation voltage: 2.4V to 3.6V (whole system)
- Temperature range: -40℃ to +85℃
- 8-bit RISC architecture
- 46/66 powerful instruction set
- 8×8 hardware multiplexer
- Support crystal oscillator up to 8MHz
- Built-in precise 2MHz RC oscillator
- Max. 4×40 LCD driver
- Low, 0.65μA (typ.) sleep current
- Built-in EPROM 64 word
- 24-bit fully differential ΣΔ analog-to-digital converter (ADC)
- Ultra low input referred noise 100nVrms
- ENOB up to 20-bit, 18-bit noise-free
- Rail-to-rail input range
- Built-in input buffer
- Conversion rate up to ~1kSPS
- x1/4, x1/2…x128 programmable gain amplification with < 5ppm/℃ gain drift
- ±2℃ accuracy temperature sensor
- Built-in low noise OPAMP
HY11P Series
Model No. | VDD | Internal Clock |
System Clock |
Program Memory (word) |
Data Memory (byte) |
Built-in EPROM (word) |
ADC ENOB (bit x ch.) |
Sample Rate |
TPS | OPAMP (type x ch.) |
RTC | LCD (com x seg ) |
I/O | Timer | PWM | Serial Interface |
Package | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
8-bit | 16-bit | |||||||||||||||||
HY11P12* | 2.2V~ 3.6V |
28KHZ 2MHZ |
28KHZ~ 8MHZ |
2k | 128 | – | 20-bitx4 | 8sps~ 977sps |
Y | – | Y | 4×12 | 4xI +10xIO | 1 | – | – | – | LQFP 44 LQFP 48 |
HY11P13 | 2.2V~ 3.6V |
28KHZ 2MHZ |
28KHZ~ 8MHZ |
4k | 256 | – | 20-bitx8 | 8sps~ 977sps |
Y | LNAx1 | Y | 4×20 | 4xI +10xIO | 2 | 1 | 8-bit x1 | SPI | LQFP 64 |
HY11P14 | 2.2V~ 3.6V |
28KHZ 2MHZ |
28KHZ~ 8MHZ |
8k | 512 | – | 20-bitx8 | 8sps~ 977sps |
Y | LNAx1 | Y | 4×29 | 4xI +10xIO | 2 | 1 | 8-bit x1 | SPI EUART |
LQFP 64 |
4×40 | 8xI +20xIO | 8-bit x4 | LQFP 100 | |||||||||||||||
HY11P23 | 2.2V~ 3.6V |
28KHZ 2MHZ |
28KHZ~ 8MHZ |
4k | 256 | – | 20-bitx8 | 8sps~ 977sps |
Y | LNAx1 | Y | – | 10xI +12xIO | 2 | 1 | 8-bit x1 | SPI EUART |
LQFP 32 QFN 32 |
7xI +12xIO | SSOP 28 | |||||||||||||||||
HY11P24 | 2.2V~ 3.6V |
28KHZ 2MHZ |
28KHZ~ 8MHZ |
8k | 512 | – | 20-bitx8 | 8sps~ 977sps |
Y | LNAx1 | Y | – | 18xI +20xIO | 2 | 1 | 8-bit x4 | SPI EUART |
LQFP 44 LQFP 48 |
HY11P32* | 2.2V~ 3.6V |
28KHZ 2MHZ |
28KHZ~ 2MHZ |
2k | 128 | 64 | 20-bitx3 | 8sps~ 977sps |
– | – | – | 4×12 | 4xI +8xIO | 1 | – | – | – | LQFP 44 LQFP 48 |
HY11P33 | 2.2V~ 3.6V |
28KHZ 2MHZ |
28KHZ~ 8MHZ |
4k | 256 | 64 | 20-bitx3 | 8sps~ 1953sps |
– | – | Y | 4×20 | 4xI +8xIO | 2 | – | 8-bit x1 | – | LQFP 64 |
HY11P35 | 2.2V~ 3.6V |
28KHZ 2MHZ |
28KHZ~ 8MHZ |
6k | 256 | 64 | 20-bitx8 | 8sps~ 977sps |
Y | LNAx1 | Y | 4×32 | 12xI +14xIO | 2 | 1 | 8-bit x4 | – | LQFP 100 |
HY11P36 | 2.2V~ 3.6V |
28KHZ 2MHZ |
28KHZ~ 8MHZ |
4k | 256 | 64 | 20-bitx3 | 8sps~ 1953sps |
– | – | Y | 4×32 | 4xI +8xIO | 2 | – | 8-bit x1 | – | LQFP 64 |
HY11P41 | 2.2V~ 3.6V |
28KHZ 2MHZ |
28KHZ~ 2MHZ |
2k | 128 | 64 | 20-bitx4 | 8sps~ 1953sps |
Y | – | – | – | 6xI +5xIO | 2 | 1 | 8-bit x1 | – | SSOP 16 SOP 16 QFN 16 |
HY11P42 | 2.2V~ 3.6V |
28KHZ 2MHZ |
28KHZ~ 8MHZ |
2k | 128 | 64 | 20-bitx7 | 8sps~ 977sps |
Y | – | Y | – | 7xI +8xIO | 2 | – | 8-bit x1 | EUART | SSOP 28 |
7xI +12xIO | TSSOP 28 QFN 24 |
|||||||||||||||||
HY11P52* HY11P52B* |
2.2V~ 3.6V |
28KHZ 2MHZ |
28KHZ~ 2MHZ |
2k | 128 | 64,LV | 20-bitx3 | 8sps~ 1953sps |
– | – | – | 4×12 | 4xI +8xIO | 1 | – | – | – | LQFP 48 |
HY11P54 | 2.2V~ 3.6V |
28KHZ 2MHZ |
28KHZ~ 8MHZ |
8k | 256 | 64,LV | 20-bitx7 | 8sps~ 1953sps |
– | LNAx1 | Y | 4×32 | 9xI +9xIO | 2 | – | 8-bit x1 | EUART | LQFP 64 |
20-bitx8 | 4×32 | 13xI +12xIO | LQFP 100 |
Remark:
ADC:24-bit Sigma Delta ADC.
OPAMP:LNA (Low Noise Amplifier).
TPS:Internal temperature sensor.
RTC:Support external 32768Hz crystal or 450KHz~8MHz ceramic resonator or 1MHz~8MHz crystal oscillator
Timer:Timer A(8-bit) support multi-segment interrupt time setting; Timer B(16-bit) support Capture Compare function;
Timer C (8-bit) support PWM / PFD function.
*:H08B instruction, the main difference is that the instruction set does not contain 8×8 hardware multiplier, 16-bit table
read instruction, conditional skip instruction and stack manipulation instructions.
Product Application Notes
Document | Description | User Manual | Application Source Code | Product Videos |
---|---|---|---|---|
UG-HY11S14 | HY11P series User’s Guide | Download | ||
APD-CORE001 | Comparisons and Supplements of Instruction Set H08A and H08B | Download | ||
APD-CORE002 | H08A Instruction Set Manual | Download | ||
APD-CORE003 | H08B Instruction Set Manual | Download | ||
APD-HYIDE003 | HY-MCU COMPILER | Download | ||
APD-HYIDE018 | HYCON 8-bit MCU C Compiler User’s Manual | Download | ||
APD-ICE001 | HY11P52 Low Voltage Programming/LookupTable/PFM Instruction Manual | Download | ||
APD-ICE003 | HY11P52B Low Voltage Programming/LookupTable/PFM Instruction Manual | Download | ||
APD-OTP001 | Description of OTP Products Programming Pin Definition | Download | ||
APD-PCB001 | HY11P Series PCB Layout Suggestion | Download | ||
APD-SD18002 | Instant On measurement | Download | Download | |
APD-SD18003 | 50/60Hz Rejection Solution | Download | Download | |
APD-SD18004 | Auto Wake up and Reset Zero without On & Off Switch | Download | Download | |
APD-SD18005 | 3 1/2 Low Power Consumption Voltage Measurement | Download | Download | |
APD-SD18006 | 4mA~20mA Measuring Meter Display | Download | Download | |
APD-SD18007 | Kitchen Scale Application | Download | Download | |
APD-SD18008 | 3000 Counts Pricing Scale | Download | Download | |
APD-SD18009 | IR Sensor Application | Download | Download | |
APD-SD18010 | Application of Wide Range Temperature Measurement | Download | Download | |
APD-SD18011 | Application of Wide Range Temperature Measurement | Download | Download | |
APD-SD18012 | Voltage and Temperature Measuring | Download | Download | |
APD-SD18013 | Application of Pricing Scales that conform with OIML Standard | Download | Download | |
APD-SD18014 | Rapid Response Body Thermometer | Download | Download | |
APD-SD18019 | 4-20mA Two-wire Transmission Application | Download | Download | |
APD-SD18020 | HY11P12 K-Type Thermocouple Measurement | Download | ||
APD-SD18021 | Dual PIR Sensor Measurement Application | Download | Download | |
APD-SD18022 | HY11P12 Silicon Pressure Sensor Application | Download | ||
APD-TMB001 | TimerB Pedometer Principle Application | Download | ||
APD-TMC001 | TimerC Boost Circuit Application | Download | ||
APN-ICE001 | Emulation Methods Of ICE Current Consumption | Download | ||
APN-ICE002 | ICE not connect Revision Description | Download | ||
APN-ICE003 | HY11P42 Series Addressing Application Precautions | Download | ||
APN-SD18003 | ACM Voltage Operating Instructions | Download | ||
OJTI-HM-2013-002 | QFN/DFN PCB Pad Design and Soldering Production Process Precautions | Download |
Tools & Software & Document Download Page
Model No. | Description | Software | Software User Manual | Hardware User Manual | Training Videos |
---|---|---|---|---|---|
HY11S14-DK03 | HY11P Series In-Circuit Emulator (Support HY11P Series,Except HY11P54) |
Download | Download | Download | |
HY11S14-DK05 | HY11P54 Series In-Circuit Emulator (Support HY11P32/HY11P33/HY11P36/HY11P52/HY11P52B/HY11P54 Series Products) |
Download | Download | Download | |
HY11P HexLoader | HY11P Series Writer Software | Download | Download | ||
HY11P24- AK01 | HY11PΣΔADC Performance Test Tool | Download | Download | Download | |
HY10000-WK08D | Integrated Writer,Support HY10P/HY11P/HY12P/HY13P/HY15P/HY17P/HY16F18x/19x/3981 Series Products | Download | Download | Download | |
H08 C IDE | C language development environment software for H08 core’s Chip | Download | Download | ||
HY11P Series C Library | HY11P Series Peripheral Driver C Library | Download | Download |